Basic Info.
Certification
RoHS, FCC, CE
Transmission Distance
<50m
Supply Voltage
DC5V-12V-24V
Working Temperature
-30~65 Degree Celsius
Usage Condition
Indoor Use
Transport Package
Color Inner Box + Outside Carton
Specification
WIFI Touch Controll
Product Description
Magic Color Wireless Remote Control 2.4Ghz LED Strip Lights WiFi LED Controller
Introduction:
WiFi-LED controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer's demand, it is one type controller which integration the newest wifi technical in the market. It makes the LED control more convenience, more hommization. We can use an Android system or IOS system mobile phone to install control software, then it can control LED, this is the wishes of every customer. Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than 50m, in outdoor can control more than 100m.
In the condition of not use the mobile software, also can use the remote control to control, very convenience,two choices for you.
main characteristic:- Novel, fashionable, unique, noble appearance, high sensitivity with good feeling.
- The touching ring is sensitive, the RGB color wheel is Very intuitive appear in the touch ring,user can choose the color they prefer easily.Beside, this remote can be touch single point or to touch continually to realize choosing the color .
- Low power consumption, long lifespan, can be touch infinite times , overcome the shortcomings of traditional key short lifespan.
- With auto Resting function, it will be turn into Resting state after 20 seconds with touching the remote control, this function can Realize saving electricity and prolong the battery lifespan.
- With auto Resting function, it will be turn into Resting state after 20 seconds with touching the remote control, this function can Realize saving electricity and prolong the battery lifespan.
- Stable remote, long remote distance.
Technical parameters:
Controller:
1:Working voltage: DC5--24V
2:Output control: can flexible control 3 channel, 2 channel, 1 channel LED lamps.
3:Output current: 4A*3
4:Connect mode: common anode
5:Packing size:L215*W165*H55(mm)
6:External dimension: L107*W65*H30(mm)
7:Net weight:340g
8:Gross weight:480g
9:Receiving sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),802.11g OFDM(-15dBm)
Remote Control:
1:Working temperature:-20-60ºC
2:Power supply method:AAA*3
3:Supply voltage:1.5V*3
4:Standby power:0.015mW
5:Standby current:3uA
6:Working current:200uA
7:Emission current:10mA
8:Remote control distance:about 50m
9:Standby time:6 months
Software technical parameters
1:Name:Magic Color 1.0
2:Runtime platform:Android version support Android system, IOS version support IOS system, equipment must have WiFi function.
3:Byte: Android version(622K),IOS version(581K).
4:Language: English
5:Category: communications
6:Free, green, no plug-ins
Magic Color 1.0 install course
1. On Off key 2. color disk 3. mode key 4. speed/brightness bar
5. RGB mode LED control page
6. Cold white and warm white mode LED control page
7. Dimmer mode LED control brightness page
8.Magic Color 1.0 software setting page
Remote control function instruction
Touch remote panel have 64 touch button(point), each button function as below:
1.on/off key, any state, can turn on or turn off controller output;
2.pause key, under dynamic mode, can make the controller stop current state;
3.this key have 2 functions:
a)mode add key, so when the current control mode is pulley mode(color), if it need to realize the mode(color) in controller, can press this button.
b)mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color) in M+ key mode table.
4. This key have 2 functions:
a) mode minus key, so when the current control mode is pulley mode(color), if it need to realize the mode(color) in controller, can press this button.
b) mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color) in M- key mode table.
5. output brightness control key, every time you press this button,the brightness series add 1, altogether 100 levels;
6. output brightness control key, every time you press this button,the brightness series minus 1, altogether 100 levels;
7. output speed control key, every time you press this button,the speed series add 1, altogether 100 levels;
8. output speed control key, every time you press this button,the speed series minus 1, altogether 100 levels;
9. Color pulley touch button, static mode choose key, up to 55 touch point. This key have 2 functions:
a) pulley static color choose button, so when the current control mode is M key mode(color), if need to realize the static color on pulley, can press this button.
b) pulley color switch key: can switch from 55 static color(pulley shows color).
2.Power management: Stop using remote control more than 20 s, remote control will utomatically
into standby mode(the state can not touch),to extend the battery life for use;shake the remote ildly
remote return to work station(the state can touch).
Remark: This remoter just apply to RGB model.
Built-in mode form of controller
The mode form of RGB Control:
The mode form of color temperature control:
The mode form of dimming Control:
Install power supply and LED equipment:
This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side (3,2,1,V+)is connect led equipment,the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V- of power supply. According to the rated voltage of led lamp, we supply power to controller ,and the rated voltage of controller is 24V. As follows:
When connect three channels LED, you should put the Magic Color 1.0 software switch to CD mode to use,only under this mode,you can control the LED's color,brightness and speed.Color disk adjust the color(Adjust process can be seen in the upper left corner R, G, B numerical with change),speed/brightness item adjust speed and bright("M"set the LED dynamic effect,"M"adjust the LED dynamic change.
When connect three channels LED, you should put the Magic Color 1.0 software switch to CT mode to use,only under this mode,you can control the LED's color temperature,brightness and color temperature shortcut key settings.Color disk adjust the color temperature(meanwhile top left CW,WW numerical with change),brightness item adjust bright,"M"key set the special color temperature state.
When connect three channels LED, you should put the Magic Color 1.0 software switch to DIM mode to use,under this mode,use color disk control the LED's brightness,Adjust process can be seen in the upper left corner NM numerical with change.
Notes:
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above(to connect the load wire first, than to connect with the power),In the process of operation please avoid short circuit.
3. Indoor use only; if used outdoor, there must be some kind of shield to avoid direct sunlight and rainfall.
Packaging: one set per Box; 30 boxes per Carton
Warranty and Maintenance:
1. Warranty: 1 year, since the date of purchase.
2. Under the terms of this warranty, if the product fails in normal usage within warranty period, we will provide free replacement based on the proof-documents.
3. If failure or damage is caused by incorrect operation, wire connection, or other unusual reason against product instruction, we will provide paid maintenance within warranty period.
4. After warranty period, paid maintenance and technical support are still available.
FAQ:
Q1. Is sample order available?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample order: 3-5 days, mass order:10-15 days (depends on the order quantity).
Q3. How do you ship the goods and how many days will it take?
A: For small order, we mainly use DHL, FedEx, UPS and TNT, etc. It takes 3-7 days. For bulk order, sea shipping is the best with lowest cost, but takes more days.
Q4. Is it OK to use my own package?
A: Yes. Normally we offer neutral inner box and carton box. Your own design is ok.
Q5: Does your company accept OEM?
A: Yes, welcome OEM!
So, please do not hesitate to contact us.
Address:
Building L3, Quan Shun Xiang Industrial Park, No. 105 Zixing Road, Keng Zi Town, Pingshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Lanhai Bright Lighting Technology Co., Ltd. Is a specialized manufacturer and wholesaler of LED Lighting products in China. We have been focusing on production of LED lighting for over ten years and has formed a reliable production line which can ensure high-quality products and optimal solutions to our customers. We always stick to our business principle of customer first, best quality, honest and trustworthy, and sincerely hope to establish a good partnership with clients from every part of the world on the basis of mutual benefit and win-win cooperation.